The Designer Series Charbroiler is a countertop gas appliance with a width of 36". It features cast iron radiants, a high/low valve control, and a piezo spark ignition. It also has flame failure protection and a stainless steel front and sides. The appliance includes an internal grease drawer with a magnetic door and 4" adjustable legs. It has a total input of 90,000 BTU and is CSA, NSF, and CE certified.
The standard features of the charbroiler include an easy clean design, cast iron radiants, a hi-lo control valve, piezo spark ignition, and the option to use natural or propane gas. It also comes with 4" sanitary legs, a stainless steel front and sides, and an 18" deep cooking surface. The rear gas connection includes a pressure regulator. The appliance is available in models with total inputs of 45,000, 60,000, 75,000, or 90,000 BTU. The "CE" approved models have flame-failure protection and are identified by the suffix "FF".
Optional features for the charbroiler include a stainless steel back and bottom, as well as a removable stainless steel 3-piece broiler splatter guard. The width of the splatter guard can be specified, and it adds 10" in height around the top section of the broiler. Stands are also available for the appliance.
The gas designer series broilers are available in four widths: 18", 24", 30", and 36". They can be used as free-standing units or banked with other GD series equipment. The appliance has a depth of 24" and a height of 15". It has an easy clean design with stainless steel front and sides, cast iron radiants, and the option for a broiler splatter shield. The charbroiler is controlled by a hi-lo valve and features a piezo spark ignition. It can be used with natural or propane gas and has total inputs of 45,000, 60,000, 75,000, or 90,000 BTU. The "CE" approved models have flame-failure protection and are identified by the suffix "FF".
