The Designer Series Charbroiler is a countertop gas appliance with a width of 30". It features cast iron radiants, piezo spark ignition, and a stainless steel front and sides. It also includes an internal grease drawer with a magnetic door and 4" adjustable legs. The charbroiler has a total input of 75,000 BTU and is CSA, NSF, and CE certified. Some of the standard features of this charbroiler include an easy clean design, a hi-lo control valve, and a rear gas connection with a pressure regulator. It is available for use with natural gas or propane gas and comes with 4" sanitary legs. The cooking surface is 18" deep and the charbroiler is equipped with a piezo spark ignition. Optional features for this charbroiler include a stainless steel back and bottom, as well as a removable stainless steel 3-piece broiler splatter guard. The broiler splatter guard adds 10" in height around the top section of the broiler. Stands are also available for this charbroiler. The gas designer series broilers are available in four widths: 18", 24", 30", and 36". They can be used as free-standing units or can be banked with other GD series equipment. The charbroilers have an easy clean design with stainless steel front and sides, cast iron radiants, and optional broiler splatter shields. They are controlled by a hi-lo valve and feature piezo spark ignition. The charbroilers can be used with natural gas or propane gas and have input options of 45,000, 60,000, 75,000, or 90,000 BTU. The "CE" approved models are equipped with Flame-Failure protection and have the suffix "FF".
