The Drop-In Hot Food Well Unit is an electric unit that can accommodate 4-pan size for 12" x 20" pans. It is a wet/dry type unit with a drain and manifold. The unit features individual infinite temperature controls and a stainless steel top and wells. The outer liner is made of galvanized steel. The unit requires a cutout size of 58-1/2" x 25" and is cUL, UL, and NSF certified. Some of the standard features of the unit include wet and dry operation, a galvanized exterior body, availability for quick shipment, and the requirement of being hard wired in the field. It also has a non-marring press fit top gasket, standard 1/2" stainless steel drain(s), and a one-year parts and 90-day labor warranty. The unit has wells that are slightly depressed into the top to hold in condensation. The individual 12" x 20" wells are flush mounted and made of 20-gauge stainless steel. The 11.87" x 19.87" single hot food wells are manifolded together standard to one main gate valve. The unit is insulated on all sides with 1" of fiberglass and has 2" of fiberfrax blanket insulation on the bottom. The unit also comes with individual infinite temperature controls that are standard wired to one main control panel with 4' of conduit and wire. The control panel can be field installed at the desired location. Some of the options and accessories available for the unit include telescoping covers, adapter plates and bars, the option to omit drains and manifold, a 220 volt, 50 cycle electrical system, and single- or double-service flip-up sneeze guards. However, including certain options may alter the electrical specifications of the unit. The specifications of the unit include a one-piece 18-gauge stainless steel top with die-stamped 19.87" x 11.87" openings. Each well is 6.25" deep and has an individual temperature control and 1000 watt heating element attached to the bottom. The wells also have a .5" female N.P.T. drain located in the right rear corner, which all manifold to a .5" gate valve at the left. The exterior housing is made of 20-gauge galvanized steel. The unit is insulated on the sides with 1" fiberglass and has 2" blanket insulation on the
