The Drop-In Hot Food Well Unit is an electric unit that features individual pans and a wet/dry type with drain and manifold. It can accommodate 2-pan size for 12" x 20" pans. The unit has individual infinite temperature controls and a stainless steel top and wells. The outer liner is made of galvanized steel. The unit requires a cutout size of 30-3/4" x 25" and is cUL, UL, and NSF certified. Some of the standard features of the unit include wet and dry operation, a galvanized exterior body, availability for quick shipment, and the need for hard wiring in the field. It also has a non-marring press fit top gasket, standard 1/2" stainless steel drain(s), and a one-year parts and 90-day labor warranty. The unit has wells that are slightly depressed into the top to hold in condensation. It also has flush-mounted die-stamped drawn 12" x 20" individual 20-gauge wells. The 11.87" x 19.87" single hot food wells are manifolded together standard to one main gate valve. The unit is insulated on all sides with 1" of fiberglass and has 2" of fiberfrax blanket insulation on the bottom. The unit comes with individual infinite temperature controls that are standard wired to one main control panel with 4' of conduit and wire. The control panel needs to be field installed at the desired location. Some options and accessories for the unit include telescoping covers, adapter plates and bars, the option to omit drains and manifold, a 220 volt, 50 cycle electrical system, and single- or double-service flip-up sneeze guards. However, including certain options may alter the electrical specifications of the unit. The specifications of the unit include a one-piece 18-gauge stainless steel top with die-stamped 19.87" x 11.87" openings. Each well is 6.25" deep and has an individual temperature control and 1000 watt heating element attached to the bottom. The unit also has a .5" female N.P.T. drain located in the right rear corner, with all drains manifolded to a .5" gate valve at the left. The exterior housing is made of 20-gauge galvanized steel. The unit is insulated on the sides and between wells with 1" fiberglass, and the bottom has 2
