The dishwasher is a round, rack type machine with a high temperature feature and a built-in 6.5 kW booster heater. It has both automatic and manual controls and a 1/2 HP rinse pump and motor. The dishwasher is designed for low water pressure and has a stainless steel finish. It is cULus and NSF certified. The Model 10A dishwasher includes an external vacuum breaker, incoming water pressure regulator, and electric wash tank heat with low water protection. It has a heavy-duty construction and a round design for even wash action. The dishwasher also has exclusive counter-rotating wash arms for superior wash action. It must be connected to a minimum 180°F potable water source for sanitizing rinse. It comes with three 17-1/2" diameter round racks: one Dish, one Combination, and one Four Compartment Silver. The Model 10AB dishwasher has all the standard features of the Model 10A, but also includes a 6.5 kW built-in booster heater. It must be connected to a minimum 140°F potable water source for proper sanitizing rinse. The booster heater is thermostatically controlled to maintain the proper sanitizing temperature. The Model 10APRB dishwasher has all the standard features of the Model 10AB, but also includes a 1/2 HP pump to ensure proper flow pressure during the rinse cycle. It is designed for areas with low and/or fluctuating water pressure, making it ideal for facilities on well water systems or where flow pressure is below 15 psi. It must be connected to a minimum 140°F potable water source for proper sanitizing rinse. Accessories for the dishwasher include a Peg Rack, Combination Rack, 12-Compartment Rack, and 6-Compartment Silverware Basket. The dishwasher uses 1.29 gallons of water per rack and can wash 45 racks per hour. It has a fully automatic 72-second cycle and a 4.5 gallon wash tank. The inside chamber clearance is 17-1/4" and the standard table height is 34". The dishwasher is made of durable stainless steel construction.
