The bottle cooler has a flat top and measures 48"W x 24"D. It has self-contained refrigeration and can hold up to 14.5 cases of 12oz bottles. The cooler features two sliding lids and three adjustable chrome plated divider racks. It also includes a condensate evaporator and has a stainless steel interior with a black vinyl clad exterior front and sides. The refrigerant used is R134a and it has a 1/3 HP motor. The cooler operates on 115v/60hz/1-ph with 5.5 amps. It comes with an 8' cord and NEMA 5-15P plug. The cooler is ETL-Sanitation approved. Some standard features of the cooler include no drain connection required and a condensate evaporator pan. It is insulated with 2" thick foamed-in-place polyurethane. The exterior is made of 20 gauge galvanized steel at the back, while the front and sides are either 20 gauge black vinyl or stainless steel, depending on the model. The interior features adjustable chrome plated partitions, a 20 gauge stainless steel floor, and 20 gauge stainless steel walls. The cooler has heavy-duty foamed-in-place doors with a grab bar handle and optional locks. The refrigeration system is self-contained with a 1/3 HP 134A refrigerant. The operating range is 30°F-40°F for 48" and 24" units, and 1/5 HP 134A refrigerant for 30°F-40°F operating range for 36" units. For electrical requirements, a dedicated 15 amp circuit is recommended. The cooler operates on 115V, 1 Phase, 60 Hz and comes with an 8' plug-in cord that exits the left rear of the cooler. The plug configuration is NEMA 5-15P. Optional accessories for the cooler include locks, LED interior light kit, additional wire partition, casters with brakes in various sizes, bottle opener and cap catcher.
