The bottle cooler has a flat top and measures 72"W x 24"D. It has self-contained refrigeration and can hold up to 25.5 cases of 12oz bottles. The cooler features two sliding lids and four adjustable chrome plated divider racks. It includes a condensate evaporator and has a stainless steel interior and exterior front & sides. The refrigerant used is R134a and it has a 1/3 HP compressor. The cooler operates on 115v/60hz/1-ph and requires 6.0 amps. It comes with an 8' cord and NEMA 5-15P plug. The cooler is ETL-Sanitation approved. Standard features of the cooler include no drain connection required and a condensate evaporator pan. It has 2" thick foamed-in-place polyurethane insulation. The exterior is made of 20 gauge galvanized steel at the back, while the front and sides are either 20 gauge black vinyl or 20 gauge stainless steel, depending on the model. The interior features adjustable chrome plated partitions, a 20 gauge stainless steel floor, and 20 gauge stainless steel walls. The cooler has heavy-duty foamed-in-place doors with a rugged grab bar handle. Optional locks are available for the doors. The refrigeration system is self-contained with a 1/3 HP 134A compressor. The operating range is 30°F-40°F for 72" and 96" units, and 24" and 36" units have a self-contained 1/5 HP 134A compressor. The electrical requirements for the cooler include a dedicated 15 amp circuit. It operates on 115V, 1 Phase, 60 Hz and comes with an 8' plug-in cord that exits the left rear of the cooler. The plug configuration is NEMA 5-15P. Optional accessories for the cooler include locks, LED interior light kit, additional wire partition, casters with brakes (3" or 2" low profile or 1" ultra low profile), bottle opener and cap catcher.
