The bottle cooler has a flat top and measures 24"W x 24"D. It features self-contained refrigeration and can hold up to 5 cases of 12oz bottles. The cooler has a sliding lid and an adjustable chrome plated divider rack. It includes a condensate evaporator and has a stainless steel interior and exterior front & sides. The refrigerant used is R134a and it has a 1/5 HP compressor. The cooler operates on 115v/60hz/1-ph and consumes 4.0 amps. It comes with an 8' cord and NEMA 5-15P plug. The cooler is ETL-Sanitation approved. Standard features of the cooler include no drain connection required and a condensate evaporator pan. It is insulated with 2" thick foamed-in-place polyurethane. The exterior is made of 20 gauge galvanized steel at the back, while the front and sides are either 20 gauge black vinyl or 20 gauge stainless steel, depending on the model. The interior features adjustable chrome plated partitions, a 20 gauge stainless steel floor, and 20 gauge stainless steel walls. The cooler has heavy-duty foamed-in-place doors with a grab bar handle and optional locks. The refrigeration system is self-contained and uses 1/3 HP 134A refrigerant, with a 30°F-40°F operating range for 24" and 36" units, and a 1/5 HP 134A refrigerant for 30°F-40°F operating range for larger units. The electrical requirements for the cooler include a dedicated 15 amp circuit. It operates on 115V, 1 Phase, 60 Hz and comes with an 8' plug-in cord that exits the left rear of the cooler. The plug configuration is NEMA 5-15P. Optional accessories for the cooler include locks, LED interior light kit, additional wire partition, casters with brakes in various sizes, bottle opener and cap catcher.
