The Polar Cuisine Freezer Base is a one-section freezer with two 19" drawers. It has a stainless steel exterior and 6" stainless steel legs. This freezer base is only available when ordered with Cuisine Series modular cook tops. It operates on 115v/60/1-ph with 0.73 amps. Standard features include 6" adjustable legs, a Santoprene magnetic door gasket, a center located flush mounted handle, a stainless steel exterior front and sides, and a front face mounted scroll type thermometer. It also has a vertically mounted blower coil with HFC-404A refrigerant, heavy-duty stainless steel drawer slides with stainless steel bearings, and removable track assembly drawers with a 10-year warranty for parts. The interior features ABS door front and cabinet sides, a stainless steel interior top, rear, and bottom. The standard drawers have a mullion between them to accommodate 12"x 20" x 4" deep hotel pans. The freezer base has a 6" mechanical section with a removable front panel for all refrigerant and electrical connections. Please note that the compressor is not included and must be provided by others. The unit must be hard-wired on site. Optional features include casters, doors and tray racks to accommodate sheet pans instead of drawers (not available on 32" drawers), and extra deep drawers without a mullion to accommodate 6" deep hotel pans (150mm deep Gn 1/1 pans). The specifications for this freezer base state that it is exclusively used under US Range Heavy Duty Cuisine Series modular tops. It has a stainless steel exterior front and sides, ABS interior door front and cabinet sides, and a stainless steel interior top, rear, and bottom. It also has a Santoprene magnetic door gasket, galvanized steel bottom and back, and CFC free foamed in place insulation. The removable stainless steel roller drawer assembly has self-lubricating rollers and carries a 10-year parts warranty. The standard drawers can accommodate 12" x 20" x 4" deep hotel pans. The refrigeration system uses HFC-404A refrigerant and includes an electric condensate evaporator, solenoid, and thermostat. The unit must be hard-wired on site. It also has a vertically mounted blower coil inside the cabinet. The unit comes with a 6" mechanical section for all refrigerant and electrical connections and is equipped with
