The Master Series Charbroiler is a gas grill with a 34" W x 23" D grill area. It features briquettes, flat/tilt grates, electric spark ignition, and a pilot valve with flame fail. The charbroiler has a storage base and stainless steel front and sides (with stainless steel exposed sides on batteries). It stands on 6" legs and has a 90,000 BTU output.
Standard features include a stainless steel front rail, 1-1/4" NPT front manifold, stainless steel front doors, stainless steel front and sides, 15,000 BTU burners, and a storage base interior made of aluminized steel. It also has 6" chromed steel adjustable legs, piezo spark ignition with constant burning pilots, and Sentry total flame failure protection for all burners. The charbroiler is available with electric spark ignition on all pilots (suffix -E models) and modular top broilers (suffix "BT") that are 14-1/2" from the broiler base to working height. The broiler grates are dual-sided, cast iron with a 1/2" rounded bar and a diamond pattern on one side and a board brand pattern on the other.
Optional features include a dais base, stainless steel main back, gas regulator (3/4" or 1-1/4"), rear gas connection (3/4" NPT), end caps and cover (NC, specify), gas shut off valve (3/4", 1" or 1-1/4" NPT), stainless steel adjustable legs (6"), 230 volt, 50 cycle components for electric ignition (export), dual-sided steel diamond grates (fine) in lieu of cast iron grates, polyurethane non-marking swivel casters with front brakes, stainless steel backguard (10", 17" or 33"), and a gas flex hose & quick disconnect (3/4", 1" or 1-1/4" NPT x 5') with a restraining device.
The specifications of the charbroiler include a stainless steel front and sides, easily movable heavy-duty rack sections for flat or tilt position broiling, dual-sided cast iron broiler grates with a 1/2" rounded bar and a diamond pattern on one side and a board brand pattern on the other. It has 15,
