The Arctic Fire Freezer Base is a one-section freezer with remote refrigeration. It features two self-closing drawers with center pull handles. The exterior is made of stainless steel and it has 6" stainless steel legs. This model is only available when ordered with Master Series modular cook tops. It operates on 115v/60/1-ph with 1.5 amps. Standard features include 6" adjustable legs, a Santoprene magnetic door gasket, a center located flush mounted handle, and a stainless steel exterior front and sides. It also has a vertically mounted blower coil with HFC-404A refrigerant, heavy-duty stainless steel drawer slides with stainless steel bearings, and removable track assembly drawers with a 10-year warranty for parts. The unit has a front face mounted scroll type thermometer (digital thermometer on CE units) and an ABS interior door front and cabinet sides. The interior top, rear, and bottom are made of stainless steel. The unit has a 6" mechanical section with a removable front panel for all refrigerant and electrical connections. The standard drawers have a mullion between them to accommodate 12"x 20" x 4" deep hotel pans (GN 1/1 pans, 100 mm deep for CE units). Note that the compressor is not included and must be provided by others. The unit must be hard-wired on site. Optional features include casters, doors and tray racks to accommodate sheet pans instead of drawers (not available on 32" drawers), and step-down sections with single drawers for modular top charbroilers. Specifications for this model include a stainless steel exterior front and sides, ABS interior door front and cabinet sides, and a stainless steel interior top, rear, and bottom. It has a Santoprene magnetic door gasket, a galvanized steel bottom and back of base, and CFC free foamed in place insulation. The unit has a removable stainless steel roller drawer assembly with self-lubricating rollers, and the roller assemblies carry a 10-year parts warranty. The standard drawers accommodate 12" x 20" x 4" deep hotel pans (GN 1/1 pans, 100mm deep for CE models). The refrigeration system uses HFC-404A refrigerant and is supplied with an electric condensate evaporator, solenoid, and thermostat. The unit must be hard-wired on site. It has a vertically mounted blower coil on
