The Designer Series Griddle is a countertop gas griddle with a 24" W x 18" D cooking surface. It features a 1/2" thick polished steel griddle with a 2-5/8" welded splash guard on the sides and rear of the plate. The griddle has a high/low valve control with piezo spark ignition and flame failure protection. The front and sides are made of stainless steel, and it has an internal grease drawer with a magnetic door. The griddle has 4" adjustable legs and a total BTU of 40,000. It is CE, CSA, and NSF certified. The griddle has an easy clean design and piezo spark ignition. It can be used with natural or propane gas and comes with 4" sanitary legs. The front and sides are made of stainless steel, and the cooking surface is 18" deep. The griddle is available with a hi-lo valve control and has input ratings of 20,000, 40,000, or 60,000 BTU. It has a rear gas connection with a pressure regulator. Thermostat control models are also available. The griddle has a 1/2" thick polished steel griddle with a 2-5/8" welded splash guard on the sides and rear of the plate. "CE" approved models have flame failure protection. Optional features include a stainless steel back and bottom, fully grooved griddle, and grooved sections. The gas designer series griddles come in three widths: 15", 24", and 36". They can be used as free standing or banked with other GD series equipment. The griddles have an easy clean design with stainless steel front and sides. Fully grooved or grooved section griddles are available. They can be valve or thermostat controlled and have piezo spark ignition. They can be used with natural or propane gas and have input ratings of 20,000, 40,000, or 60,000 BTU. "CE" approved models have flame failure protection. Gas input ratings are for installations up to 2,000 ft. above sea level. Garland products are intended for commercial applications only and are not approved for home or residential use.