The Master Griddle is a countertop gas griddle with a rear drain. It has a cooking surface that measures 60" W x 24" D and features a 1" thick polished steel griddle plate. The griddle also comes with electronic thermostatic controls and electronic ignition. The exterior of the griddle is made of stainless steel, including the side and rear splash guards. It is equipped with EnerLogic™ Technology and has a BTU rating of 150,000. The griddle is CSA and NSF certified. Standard features of the griddle include a full-width front rail, electronic controls, a gas regulator valve, stainless steel sides, a stainless steel backguard, and a stainless steel valve panel. It also has an 8" high back splash, a stainless steel grease trough, and a 120V electrical requirement. Additional features include a gas pilot ignition indicator light, nickel-plated thermostat guards, and a contoured grease chute opening. The griddle has a rear grease trough with a bottom drawer and stainless steel side griddle splashguards. It stands on 6" high stainless steel adjustable legs and has an electric main on/off power switch with an indicator light. Each thermostat burner system has its own electric on/off switch with an indicator light. The griddle is equipped with one "U" shaped 30,000 BTU burner every 12" of griddle width. The electronic thermostat allows for temperature control ranging from 150°F to 450°F for each burner every 12" of griddle width. The griddle also comes with stainless steel 6" deep grease drawers with integral grease baffles. The capacity of the grease drawers is 1.6 gallons. It is important to note that commercial griddles supplied with casters must be installed with an approved restraining device. Optional features for the griddle include a protective shield for the controls, 208-240 Volts electrical supply, an optional extended rear gas connection, and a 3/4" x 36" Quick Disconnect gas hose with a restraining device. Other optional features include 10-1/2" sloped grease drawers for stand models, a stainless steel open stand with a bottom shelf on adjustable legs or casters, and 4" high stainless steel adjustable legs with a 3-1/4" high grease drawer, ideal for refrigerated equipment base mounts. The capacity of this grease drawer is 2.36