If you're looking for a reliable draft beer station for your establishment, the DD72HC-1-S Draft Beer Cooler from Beverage Air is the perfect choice. With a capacity of 19.95 cu. ft., it can store three ½ kegs. This unit is equipped with self-closing doors and magnetic door gaskets to prevent excessive power draw while keeping your kegs as cold as possible. It also comes with standard door locks for added security. The interior features galvanized steel construction for the walls and ceiling, while the floor and door sill are made from durable stainless steel. The stainless steel top includes built-in drip trays to catch spills, which connect to a drain tube at the bottom of the unit for easy disposal. Thanks to the insulated 3" stainless steel dispensing towers with four taps, beer served from this unit is always nice and cool without too much foam. The unit also has a 3-in-1 draft solution that allows a single tap to be used for different beverages, made possible by silver-lined tubing that is 100% effective against the top four beverage spoiling bacteria. The side-mounted refrigeration system provides efficient cooling and can be located on either the left or right side of the unit based on your needs. The 1/4 HP compressor produces 1942 BTU/hr of cooling. The unit's epoxy-coated evaporator keeps the interior temperature between 36ºF and 38ºF reliably with minimal maintenance, while fully electronic controls reduce power consumption and stress on the refrigeration system. The automatic non-electric defrost system keeps the interior frost-free, minimizing downtime. The unit uses R290 refrigerant to meet all environmental regulations. Connecting this unit to a standard 115v/60/1-ph power outlet is simple with the factory wired 8' power cable with a NEMA 5-15P plug set. The DD72HC-1-S Draft Beer Cooler comes with a range of standard features including two dual tap towers, full electronic control, field reversible doors, self-closing doors with locks, and a 3" insulated dispensing tower. The magnetic gaskets provide a positive door seal, and the top is made from heavy-duty stainless steel with a drip tray. The exterior is available in a wear-resistant vinyl on steel in black or stainless steel finish. The interior is made from galvanized steel on the walls and ceiling, with a reinforced floor made from heavy-duty stainless steel. The refrigeration
