The Beverage Air BM23HC-B-28 Draft Beer Cooler is a compact and portable dispenser that does not come with a draft arm. It has a capacity of 7.66 cu. ft. and can hold one ½ keg, four ? kegs, or two ¼ kegs.
The interior of the cooler is made of galvanized steel for the walls and ceiling, with a reinforced stainless steel floor and door sill for durability. The self-closing door has a magnetic gasket for a secure seal and comes with a standard door lock. The top of the cooler is made of stainless steel and has a built-in drip tray that connects to a waste bottle inside the unit, eliminating the need for a floor drain.
The refrigeration system is self-contained and efficient, with a ? HP compressor that produces 1094 BTU/hr of cooling. The fully electronic controls keep the temperature inside the cooler between 36ºF and 38ºF. The evaporator coil is epoxy-coated for reliable refrigeration with minimal maintenance. Defrosting is done automatically with a non-electric system to reduce downtime and keep the interior frost-free. The refrigerant used is R290, an environmentally-friendly hydrocarbon.
The cooler comes with an 8-foot power cable prewired with a NEMA 5-15P plug for use with standard 115v/60/1-ph power.
Standard features of the cooler include a no draft arm design, full electronic control, field reversible doors, four-inch heavy-duty casters, self-closing doors with locks, a beer waste bottle, magnetic door gaskets, and a heavy-duty stainless steel top with a drip tray. The exterior is wear-resistant vinyl on steel, available in black or stainless steel finish. The interior construction includes galvanized steel walls and ceiling, a stainless steel doorsill, and a reinforced floor made of heavy-duty stainless steel.
The refrigeration system features an epoxy-coated evaporator coil, heavy-duty forced air refrigeration, and an automatic, non-electric evaporator. It uses R290 refrigerant to comply with environmental regulations.
Optional accessories for the cooler include a wine tap, 1-4 faucet, glass rinser, outdoor models, leg accessory kit, wine models, 2, 3, or 4-way manifold, and a dial/digital thermometer. The cooler is available in stainless steel or black exterior club models.
