The Beverage Air DD58HC-1-C-B Draft Beer Cooler is a dual tower club top model designed to serve perfect frosty glasses of beer. It has a 21.86 cu. ft. interior capacity that can hold three ½ kegs. The unit features self-closing doors with magnetic door gaskets to prevent excessive power draw and keep the kegs as cold as possible. Door locks are included for security. The interior is made of galvanized steel for the walls and ceiling, while the floor and door sill are made of durable stainless steel. The stainless steel top provides a serving area and comes with a built-in drip tray that connects to a drain tube for easy cleaning. The 3" dispensing tower is insulated to prevent foaming and ensure the beer is always cool. This club top model has two sliding lids made of stainless steel that open easily. Each lid has a basket with an epoxy-coated wire shelf for storing glasses, cans, or bottles that need to be accessed quickly. The stainless steel taps feature the 3-in-1 Draft Solution from Beverage Air, which prevents bacterial growth with silver-lined tubing. The unit has a side-mounted refrigeration system with a ¼ HP compressor that produces 1702 BTU/hr of cooling. The compressor can be mounted on the left or right to fit your needs. The fully electronic controls maintain the interior temperature between 36ºF and 38ºF efficiently, while the epoxy-coated evaporator ensures reliable heat exchange with minimal service. The unit uses eco-friendly R290 hydrocarbon refrigerant, which has a low impact on the environment and meets all regulations. The non-electric defrost cycle reduces downtime. The unit comes prewired from the factory with an eight-foot power cord and a NEMA 5-15P plug set for easy installation. It requires 115v/60/1-ph power at 2.5 amps. Standard features of the unit include field reversible doors, full electronic control, self-closing doors with locks, two single faucets, a 3" insulated dispensing tower, magnetic gaskets for positive door seal, a heavy-duty stainless steel top and drip tray, and a galvanized steel interior. The refrigeration system includes an epoxy-coated evaporator coil, an automatic non-electric evaporator, and forced air refrigeration to keep the beer in kegs ice cold for dispensing. The unit uses R290 refrigerant to comply with environmental concerns.
