Beverage Air DD94HC-1-B

Brand
Beverage Air
Made in
USA
Refrigerant Type
R-290
Number of Taps
4 Taps
Number of Doors
3
Construction
Stainless and Galvanized Steel
Number of Kegs
5 Kegs
Exterior Finish
Black
Certifications
cULus
Installation Type
Built-In
Amps
5.5 Amps
Type
Beer Dispensers
Door Type
Solid
Sections
3
Style
1/2 Barrel
Voltage
115 Volts
Width (in)
95
Height (in)
52.5
Depth (in)
29
Weight
458.00
Loading Dealers...
If your establishment requires a large draft beer serving station, the DD94HC-1-B Draft Beer Cooler from Beverage Air is an excellent choice. With 37.82 cu. ft. of refrigerated storage, it can hold up to five ½ kegs.

This unit is equipped with self-closing doors and magnetic door gaskets to prevent excessive power consumption while keeping the kegs as cold as possible. For added security, door locks are included. The interior features galvanized steel construction for the walls and ceiling, while the floor and door sill are made from durable stainless steel. The 3" stainless steel dispensing towers are insulated to prevent beer from foaming and ensure that each glass is served at the optimal temperature. The top is also made from durable stainless steel and comes with built-in drip trays that connect to a floor drain through internal routing. Additionally, this unit features a 3-in-1 draft solution, allowing different beverages to be served from a single tap. The silver-lined tubing effectively prevents the growth of the top four beverage spoiling bacteria.

The refrigeration system of this unit is powered by a ? HP compressor that produces 2392 BTU/hr. The compressor can be installed on either the right or left side of the unit. With an epoxy-coated evaporator, the kegs are kept reliably between 36ºF to 38ºF. The refrigeration system also features fully electronic controls for optimal efficiency. To minimize downtime and maintain peak efficiency, this unit defrosts automatically with a non-electric system. It uses R290 hydrocarbon refrigerant to comply with all environmental regulations.

This draft beer cooler comes with an 8' power cord and a NEMA 5-15-P plug set, allowing it to be connected to a standard outlet with 115/60/1-ph power at 5.5 amps.

Standard Features:

- Full electronic control
- Field reversible doors
- Two dual tap towers
- Self-closing doors with locks
- 3" insulated dispensing tower(s)
- Magnetic gaskets provide a positive door seal
- Heavy-duty stainless steel top and drip tray
- Compressor available on left or right side (specify at the time of unit order)
- Wear-resistant vinyl exterior in black or stainless steel finish
- Drain tube located at the bottom front of the cooler or connection to a floor drain
- Galvanized steel interior walls and ceiling, with a reinforced floor made of heavy-duty
Similar Items