Standard Features: - ENERGY STAR Qualified - Capacity of 37 racks per hour - 3/4 Hp (0.56 kW) wash pump - Built-in liquid detergent and rinse aid pumps - Stainless steel non-clogging wash and rinse arms - Water consumption of 0.66 gallons (2.5 liters) per rack - Includes one peg rack and one combination rack - Pumped drain for both floor and wall drain applications - Front mounted controls with digital temperature displays - Type A air gap system eliminates the need for a vacuum breaker - Variable programmed time cycles - 95, 150, and 210 seconds - Constructed with 304 and 316L stainless steel for corrosion resistance - Fully automatic - automatic fill, automatic start, and automatic reset - Machine shutdown activates an automatic rinse of the wash chamber for easier cleaning - Sloped ceiling for user safety and to prevent dripping of soiled water onto sanitized ware - Double-wall construction keeps heat inside the machine, reducing energy consumption and heat loss into the dishroom environment Special Features: - Soft Start wash pump to protect dishes and glasses from chipping or breaking - Aqua-Stop automatically stops machine operation and turns off the external fill valve if an internal leak is detected - Built-in booster heater with power rinse pump guarantees constant final rinse pressure and temperature for consistent, outstanding results - Auto Safe temperature control system guarantees a sanitizing final rinse temperature of 180°F (82°C), regardless of incoming water temperature - Active Plus filtration system with double filtration of wash water removes food soil, improves washing efficiency, saves detergent, and eases cleaning chores - MIKE 2 electronic control system with advanced micro-computer technology for service diagnostics and end-user dishmachine settings. Includes one-touch operation, one-touch selection of three different cycle lengths, automatic temperature monitoring with digital display, and advanced service diagnostics Options: - Drain board top - Drain water tempering kit (factory installed) - Drain water tempering kit (installed by others) - Stainless steel stand - adds 8" (203mm) to height - Stainless steel cabinet stand - adds 16-3/4" (426mm) to height - Inline roller frame - 1-3/8" (35mm) H. Replaces standard legs; overall machine height 34-3/8" (873mm) - NEMA cord kit (three phase only - installed
