The IYT-1200A air-cooled ice machine from the Indigo NXT series is a powerful commercial ice maker designed to provide your busy operation with 1,213 lbs of half-dice ice cubes daily. Compared to other commercial ice machines in its range, this Indigo Series ice maker uses 22% less condenser water and has 5% lower energy consumption. The EasyTouch display makes it easy to operate the machine with its touchscreen user interface. You can access all ice-making controls, check the operating status, set up cleaning reminders, and adjust general settings from this reflective display. The machine also has a preventative maintenance feature that can send reports via the EasyTouch display, reducing unexpected breakdowns. The acoustical ice-sensing probe ensures that you always produce the perfectly sized half-dice ice cube. Cleaning is made easy with the front-accessible foodzone and removable parts, which are coated with AlphaSan to protect against contaminants. You can also upgrade the machine with the LuminIce II Growth Inhibitor to further prolong maintenance intervals. The Manitowoc IYT-1200A is a certified ice machine head unit with NSF, cULus, and CE certifications. It is 30" wide, 24 1/2" deep, and 29 1/2" tall. The air-cooled system is suitable for most commercial buildings and locations and does not incur additional water expenses. The machine is cost-efficient, saving on condenser water and energy consumption. It is also low-maintenance, with DuraTech construction that is tougher and easier to clean than stainless steel. The machine has a clear-coat layer that is fingerprint and scratch-resistant. The foodzone is easily accessible, and certain parts can be removed for cleaning. The machine is also equipped with AlphaSan to protect against contaminants. The half-dice ice produced by the machine has dimensions of 3/8" x 1 1/8" x 7/8" and is quick to produce, slow to melt, and easy to break down. The machine can produce up to 1,213 lbs of half-dice ice every 24 hours and has an ambient temperature range of 40-110 °F. It requires a 208-230/60/1 electrical connection and has a minimum circuit ampacity of 14.2 1ph/8.6 3ph. The machine is certified for safety by NSF, cULus
