The Manitowoc Ice IDT0750WM Marine water-cooled ice machine is a reliable and user-friendly asset for establishments that require a production capacity of up to 703 lbs of full dice ice in saltwater environments, such as yachts or ships.
Unlike most cube ice makers, this commercial ice machine features a high-grade stainless steel construction throughout its design, including the top cover, side and back panels, bulkhead, brackets, and fasteners. This ensures superior resistance to corrosion, dirt, and smudges, resulting in a durable ice maker that will last for a long time.
Operating and maintaining this Indigo Series ice machine is effortless, as it can initiate cleaning mode and automatically resume ice production once the cleaning process is complete. Additionally, an isolation switch is included in the machine, allowing operators to easily cut off the power during service. The cupro-nickel condenser protects the machine from damage caused by saltwater.
With a self-contained refrigeration system, this Manitowoc ice machine requires minimal setup before use. It uses an R410 refrigerant, which is environmentally friendly and does not harm the ozone layer. Please note that this is an ice machine head only unit.
The full dice ice cubes produced by this machine measure 7/8" x 7/8" x 7/8" and there are 48 cubes per pound of ice. These cubes are inexpensive and quick to make, with a slow melt rate that reduces ice consumption. They have a nearly 100% ice-to-water ratio, providing maximum cooling and reducing production needs. Full dice ice cubes are perfect for use in bars and restaurants, as they are ideal for liquor, soda, and other beverages. They can also be used for ice bagging and bulk cooling purposes.
The specifications of this Manitowoc ice machine are as follows: it can produce up to 703 lbs of full dice ice every 24 hours. The water temperature range for potable water is 40-90°F, and the water pressure for ice maker water in should be between 20 psi (137.9 kPA) and 80 psi (551.1 kPA). The condenser inlet water in should be between 20 psi (137.9 kPA) and 150 psi (1,034.2 kPA). The overall dimensions of the machine are 30"W x 24 1/2"D x 21 1/2"H. The electrical connection required
