This is a 30"W induction range, electric, floor model. It features four 8" glass induction hobs and a standard oven base with one rack. The oven has a 1-hour timer and a solid state thermostat that can be set from 150°F to 450°F. The range also has a 2" vented stainless steel stub back and a 430 stainless steel exterior. It comes with 4" casters for easy mobility. The range has a power output of 14kW and is cULus and NSF certified. There are also other induction cooktops, cookers, and commercial restaurant ranges available. The range comes with standard features such as 4" casters, a 1" high range-top back stop, and a 150-450°F oven thermostat with a 60-minute timer and alarm. The exterior is made of heavy-duty 430 stainless steel and is insulated on all six sides. It also has a 2.75" wide full front grease trough, grease drain, and spillage drawers. Griddle configurations include a one-piece splash guard, back, and sides. All ranges are factory wired for 3-phase service, but can be wired for 208 or 240V service as 1 phase by the installer. The standard oven has two 3-heat switches and an aluminized steel cooking chamber. It has a heavy-duty hinge-down door and one center rack guide with a chrome-plated rack. The convection oven has an ON-OFF power switch and a HIGH-LOW speed fan switch. The oven interior is made of 430 stainless steel and has nine position oven rack slide supports. It also has a two-speed fan with fan pulse capability and comes with five chrome-plated oven racks. The oven has simple knob-set time and temperature controls and a heavy-duty right-hinged door with magnetic closure. The compartment door is also heavy duty and has a large double-pane tempered glass window. There are also options and accessories available for this range, such as a high storage rack, extra wire pan racks, a 480 Volt, 3-phase model, and a set of 6" casters with two locking and two fixed.
