The Kolpak KFX8-128-CR Kold-Front Walk-In Cooler is a versatile and durable indoor/outdoor remote unit that utilizes advanced cooling technologies to maintain a consistent and cool air temperature. It features a 1 horsepower condenser and a 2.5" dial thermometer, ensuring that the contents of the cooler remain at an ideal temperature of 35 degrees Fahrenheit. This floorless unit has a 26 ga. embossed galvalume interior and exterior, along with a standard 34" X 78" door. It measures 102 inches tall, 139 inches wide, and 93 inches deep. The Kold-Front Walk-In Cooler, with dimensions of 8'-6.25" H, 11'-7" W, and 7'-9" L, is a floorless unit equipped with a 3/4 hp. medium temperature (+35F) pre-charged KPC68MZOP-2 and a 1.6 amps, 115/60/1 KAM26-073-1EC-PR-8. It is designed for both indoor and outdoor use and provides a reliable and efficient cooling solution. The interior and exterior are made of 26 ga. embossed galvalume, and it features 4" vinyl/foam screeds and a 2" dial thermometer. Standard Features: - The ArcticFox Temperature & Air Defrost Control simplifies cooler controls by combining thermostat and defrost timeclock functions. It is designed for medium temperature applications of 35°F and higher and includes a built-in defrost clock for time-initiated and time-terminated defrost cycles. The controller's single-pole-double-throw relay controls the refrigeration and defrost cycles. For low-temperature applications, the ArcticFox Temperature Control provides an easy-to-understand thermostat for simplified operation. It includes a battery-powered clock for proper operation after power is restored. - Additional features include a thermostat, manual defrost, first defrost 2 hours after start-up, visual alarming for high temperature, low temperature, and sensor issues, off-time defrost on schedule or custom defrost, and compressor protection with maximum starts per hour. - The ArcticFox Temperature & Air Defrost Control includes a service call saver feature and a post-defrost indicator to prevent unnecessary service calls. It alerts the user when coming out of a defrost cycle and displays the temperature measured by the air sensor until it reaches the setpoint or
