Kolpak KFX8-1206-CR

Brand
Kolpak
Certifications
NSF
Shipping
Standard Shipping
Nominal Depth
6 Feet
Nominal Width
12 Feet
Series
Kold-Front
Type
Kold-Front
Category
Walk In Cooler,Modular
Compressor Location
Remote
With Floor
Floorless
Usage
Indoor
Voltage
208/230 Volts
Width (in)
139
Height (in)
102
Depth (in)
70
Weight
1236.00
Loading Dealers...
The Kolpak KFX8-126-CR Kold-Front Walk-In Cooler is a versatile and durable indoor/outdoor remote unit that utilizes advanced cooling technologies to maintain a consistent and cool air temperature. It features a 1 horsepower condenser and a 2.5" dial thermometer, ensuring that the contents of the cooler remain at an ideal temperature of 35 degrees Fahrenheit. This floorless unit has a 26 ga. embossed galvalume interior and exterior, along with a standard 34" X 78" door. It measures 102 inches tall, 139 inches wide, and 70 inches deep.
 
 The Kold-Front Walk-In Cooler, with dimensions of 8'-6.25" H, 11'-7" W, and 5'-10" L, is a floorless unit equipped with a 3/4 hp. medium temperature (+35F) pre-charged KPC68MZOP-2 and a 1.6 amps, 115/60/1 KAM26-073-1EC-PR-8. It is designed for both indoor and outdoor use. The interior and exterior are made of 26 ga. embossed galvalume, and it features 4" vinyl/foam screeds and a 2" dial thermometer.
 
 Standard Features:
 - The ArcticFox Temperature & Air Defrost Control simplifies cooler controls by combining the functions of a thermostat and defrost timeclock. It is designed for medium temperature applications of 35°F and higher and includes a built-in defrost clock for time-initiated and time-terminated defrost cycles. The controller's single-pole-double-throw relay controls the refrigeration and defrost cycles. For low-temperature applications, the ArcticFox Temperature Control provides an easy-to-understand thermostat for simplified operation. It includes a battery-powered clock for proper operation after power is restored.
 - Thermostat
 - Manual defrost
 - 1st defrost 2 hours after start-up
 - Visual Alarming for high temperature, low temperature, and sensor issues
 - Off-time defrost on schedule or custom defrost
 - Compressor protection with maximum starts per hour
 - Service Call Saver
 - Post Defrost Indicator to prevent unnecessary service calls by alerting the user when the unit is coming out of a defrost cycle
 - Hardware includes Modbus terminals, a 4-button user interface, a 3-digit 7-segment display
Similar Items