The Kolpak KFX7-106-CR Kold-Front Walk-In Cooler is a versatile indoor/outdoor remote unit that does not have a floor. It is equipped with cooling technologies to ensure a consistent and cool airflow. The cooler has a 3/4 horsepower condenser and a 2.5" dial thermometer, allowing you to maintain a perfect temperature of 35 degrees Fahrenheit for your stored items. This durable unit has a 26 ga. embossed galvalume interior and exterior, along with a standard 34" X 78" door. It stands at 90 inches tall, 116 inches wide, and 70 inches deep. The walk-in cooler, known as Kold-Front, has dimensions of 7'-6.25" H, 9'-8" W, and 5'-10" L. It is a floorless unit with a 1/2 horsepower medium temperature condenser (+35F) that comes pre-charged with KPC48MOP. The cooler requires 5.7 amps and operates on 208-230/60/1 voltage. It also includes the KAM16-052-1EC-PR-8, which requires 0.9 amps and operates on 115/60/1 voltage. This indoor/outdoor remote unit has a 26 ga. embossed galvalume interior and exterior, along with 4" vinyl/foam screeds and a 2" dial thermometer. The cooler comes with several standard features. The ArcticFox Temperature & Air Defrost Control is a combination of a thermostat and defrost timeclock, simplifying the cooler controls. It is designed for medium temperature applications of 35°F and higher and includes a built-in defrost clock for time-initiated and time-terminated defrost cycles. The controller's single-pole-double-throw relay controls the refrigeration and defrost cycles. For low-temperature applications, the ArcticFox Temperature Control provides an easy-to-understand thermostat. It eliminates user frustration and includes a battery-powered clock for proper operation after power is restored. The ArcticFox Temperature & Air Defrost Control also includes additional features such as manual defrost, first defrost 2 hours after start-up, visual alarming for high temperature, low temperature, and sensor issues, off-time defrost on schedule or custom defrost, and compressor protection with maximum starts per hour. It also has a service call saver feature and a post-def
