Standard Features: CONSTRUCTION The kettle is made of 304 stainless steel and has a one-piece welded construction. All exposed surfaces are stainless steel. The controls are contained in a water resistant IPX6-rated enclosure. The kettle has a heavy reinforced rim with a welded-in butterfly shaped pouring lip for maximum sanitation and durability. It has right and left hand tilt handle mounts and a standard faucet bracket mounted on the rear of the controls/trunnion enclosure. FINISH The interior of the kettle is polished to a 180 emery grit finish. The exterior of the kettle has a bright high buff finish, making it easy to clean and maintain its appearance. ASME CODE, UL LISTING The unit has been ASME shop inspected, stamped, and registered with the National Board for operation up to a maximum working pressure of 50 PSI. It is also UL listed. SANITATION The unit is designed and constructed to meet NSF and known health department and sanitation codes. It is NSF listed. SELF-CONTAINED STEAM SOURCE The kettle has an electrically heated self-contained steam source that provides kettle temperatures ranging from 150°F to approximately 295°F. The 20/24 quart models have a 6 or 8 KW input, and the 40/48 quart model has a 12 or 14 KW input, depending on the kettle voltage. The unit is factory charged with water and rust inhibitors for long life and minimum maintenance. CONTROLS The controls are located in a right-side water resistant (IPX6 rated) trunnion enclosure. The Classic -C Models include a power ON-OFF switch with an indicator light, a temperature control knob with 1 to 10 increments, a HEAT(ing) indicator light, and a LOW WATER warning light. The Advanced -A Models have the same control features as the Classic models, with the addition of a temperature and time set knob, an LED display of set heat level or cook time, buttons for resetting Low Temp and High Temp presets, a MANUAL mode button for knob-setting of heat level, and a TIMER-set button with an indicator light. The Cook2Temp -C2T Models have the same control features as the Classic and Advanced models, with the addition of Auto C2T and Manual C2T buttons with a core probe connection port, a MANUAL mode button for knob-setting of heat level for manual cooking and manual C2T cooking. SAFETY SYSTEMS The
