Glastender GW24

Brand
Glastender
High or Low Temp
High Temp
Certifications
ETL
Style
Carousel
Voltage
120 Volts
Width (in)
24
Height (in)
30.75
Depth (in)
24
Weight
165.00
Loading Dealers...
If you own a bar or a small establishment with limited space and need to quickly wash a large amount of glassware, the Glastender GW24 Underbar Glasswasher should be your top choice. This compact unit can wash up to 49 glasses with a diameter of 2-½" and a maximum height of 10" in just a 2-minute and 15-second cycle. With its dimensions of 24" wide, 24" deep, and 30-¾" tall, it is designed to fit perfectly under standard height bars.
 
 The Glastender GW24 Underbar Glasswasher combines the efficiency of a rotary conveyor with the space-saving design of fill and dump washers. It does not require a dedicated water heater, allowing it to be powered by a regular wall socket. The rinse cycle uses cool water, ensuring that the glassware remains cool to the touch and preventing steam from rising when freshly washed glasses are removed. Additionally, the top cover of the unit features an integrated drainboard, making it convenient to unload the glasswasher and eliminating the need for a separate drying table that would take up more space.
 
 This unit is equipped with computer-controlled cycle management and a user-friendly control panel. It dispenses detergent, sanitizer, and rinse aid precisely using peristaltic pumps, ensuring that the glassware is perfectly cleaned while minimizing the use of chemicals.
 
 The cabinet, floor, tanks, and legs of the Glastender GW24 Underbar Glasswasher are all made of durable and easy-to-clean stainless steel. The chemical containers are conveniently located under the machine's side notch, making them easily accessible without taking up additional space. For even greater convenience, an optional slide-out rack is available to hold the chemical containers, making it even easier to check and replace the chemicals.
 
 Installation of the unit requires ½" plumbing for both hot and cold water, with ?" FMPT fittings connecting the water supply. The on-site water pressure should be between 25 PSI and 100 PSI, and the hot water temperature should be between 130ºF and 150ºF for optimal operation. Wastewater is drained through a 1-½" tailpiece, which should be connected to an open type floor drain.
 
 The Glastender GW24 Underbar Glasswasher comes with a 6-foot long grounded cord and a NEMA 5-15P plug, requiring only 3.5 amps of 120/60/1-ph power. It is
Similar Items