The cooler is a two-zone, front-serviced, bar profile with a width of 72 inches. It has three sections and a 16-inch wide door opening. The cooler has self-contained refrigeration and LED interior lighting. It also has front venting and a stainless steel interior. The refrigerant used is R290 Hydrocarbon. The cooler has a 1/4 HP motor and is NSF Standard 7 certified for closed container products. It is also cETLus, ETL-Sanitation, and ETL Verified. The cooler is a glass door back bar cooler with standard features such as a 180-degree swinging door, heated mullion to minimize condensation, and locking doors (except for the drawer sections). The cooler has two temperature zones that are independently controlled. The evaporator is located above the compressor compartment to maximize storage capacity. The cooler can be customized to have a drawer section or draft dispensing instead of a door opening. The warmer zone is always a single door and is located opposite the compressor end. The cooler is available without a finished top for integrated installation below a customer-supplied bar top. It is also available in three configurations: beer and white wine, beer and red wine, or white wine and red wine.
