The cooler is a two-zone, front-serviced, bar profile with a width of 52 inches. It has two sections and a 16-inch wide door opening. The cooler has self-contained refrigeration and LED interior lighting. It also has front venting and a stainless steel interior. The refrigerant used is R290 Hydrocarbon. The cooler has a 1/4 HP motor and is NSF Standard 7 certified for closed container products. It is also cETLus, ETL-Sanitation, and ETL Verified. The cooler has solid doors and is designed for back bar use. Some of the standard features of the cooler include a 180-degree swinging door, LED interior lighting, and a heated mullion to minimize condensation. The door(s) can be locked, although the drawer sections do not have locks. The two temperature zones are independently controlled. The evaporator is located above the compressor compartment to maximize storage capacity. It is also possible to convert any door opening into a drawer section or a draft dispensing area. The warmer zone is always a single door and is located opposite the compressor end. The cooler is available without a finished top, allowing for integrated installation below a customer-supplied bar top. It is also available in three configurations: beer and white wine, beer and red wine, or white wine and red wine.
