Key Features: - Refrigeration System: The unit has a front air breathing system for flexible installation. It comes pre-wired and ready to plug into a standard 115V/60Hz/1Ph outlet. The full-length air duct system ensures optimal circulation of cold air. The condenser and evaporator coils are large capacity and corrosion-resistant. The auto defrost cycle is time-initiated and temperature-terminated for seamless operation. Pressure relief devices allow easy access to the cabinet interior when reopening doors. The ECM fan motors provide rapid cooling with less energy consumption. The self-maintaining condensate drain pan requires no external drains or electric heaters. The auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. The unit uses environmentally friendly R290 refrigerant with zero Ozone Depletion Potential and low Global Warming Potential. - Cabinet Construction: The bottom and rear of the cabinet are made of galvanized steel. The unit is equipped with four 5" swivel casters, with locks on the front set, for easy mobility. The worktop is made of high-quality stainless steel. The insulation is 2.5" thick high-density polyurethane. The interior and exterior of the cabinet are made of heavy-duty stainless steel with rounded corners for a hazard-free workspace. - Doors: The doors have high-strength recessed handles and are made of heavy-duty stainless steel. The insulation is 2.5" thick high-density polyurethane. Frame heaters prevent exterior moisture build-up. Pre-installed door locks keep items safe from theft. The doors are self-closing with an adjustable torsion system for a positive seal. The snap-in magnetic door gasket makes cleaning and replacement easy. - Shelving: The unit comes with height-adjustable stainless steel clips and two epoxy-coated steel wire shelves per section. - Temperature Control: The unit features a multi-function digital controller with an easy-to-read LED display. It has an audible overheat protection alarm for the compressor and condenser coil. The factory preset temperature is 35°F, with a temperature setting range from 33°F to 54°F. Options: Additional shelving, 3" swivel casters with locks, 3.5" - 6" height-adjustable and interchangeable legs, and a 4" high stainless steel backsplash for worktop application.
