Everest Refrigeration EBC37

Brand
Everest Refrigeration
Compressor Style
Front Breathing
Certifications
NSF
Bottle Cooler Capacity
11-20 cu. ft.
Refrigerant Type
R-290
Construction
Stainless and Galvanized Steel
Exterior Finish
Black
Horsepower
1/5 - 1/4 HP
Compressor Location
Side Mounted
Door Type
Sliding
Voltage
115 Volts
Width (in)
36.75
Height (in)
33.75
Depth (in)
26.75
Weight
204.00
Loading Dealers...
Refrigeration System:
 
 - The refrigeration system comes pre-wired and ready to plug, operating at 115V/60Hz/1Ph with a NEMA 5-15P plug.
 - It features a full-length air duct system that ensures optimal circulation of cold air.
 - The condenser and evaporator coils have a large capacity and are corrosion-resistant.
 - The system has a time-initiated and temperature-terminated auto defrost cycle for seamless operation.
 - Electronically commutated (ECM) fan motors are used to achieve rapid cooling with less energy consumption.
 - The condensate drain pan is self-maintaining and energy-efficient, requiring no external drains or electric heaters.
 - The condenser fan motor supports compressor ventilation and condenser coil cleaning with its auto-reverse function.
 - The refrigeration system uses the environmentally friendly Blizzard R290 condensing unit, which is side mounted, self-contained, and fully detachable.
 - The Blizzard R290 refrigerant has zero Ozone Depletion Potential (ODP) and a low Global Warming Potential (GWP). It is easily replaceable and does not require on-site brazing.
 
 Cabinet Construction:
 
 - The interior of the cabinet is made of galvanized steel.
 - Built-in caster thread receptacles are provided for all models.
 - The cabinet is insulated with 1 3/4" thick high density polyurethane insulation.
 - The countertop and rails are made of heavy duty stainless steel with a textured laminate, and the exterior is covered in black vinyl.
 
 Lighting:
 
 - The unit is equipped with shielded LED bar lighting, which can be turned on or off as needed.
 - The LED lighting provides bright, high color illumination while emitting lower heat output.
 
 Bottle Cap Opener:
 
 - A front mounted bottle cap opener and cap catcher are included, and they can be easily removed for cleaning.
 
 Lids:
 
 - The lids are insulated with 3/4" thick high density polyurethane insulation.
 - Removable ratchet locks are provided to keep items safe from theft.
 - The exterior of the lids is made of heavy duty stainless steel, while the interior is made of galvanized steel.
 
 Shelving:
 
 - The unit includes vertical epoxy coated, steel wire bin dividers (quantity specified in the table).
 - Horizontal epoxy coated, steel wire shelves are provided for bottom air circulation (quantity specified in the table).
 
 Temperature Control:
 
 - The factory preset temperature is 35
Similar Items