The refrigerated work table is a three-section unit with a width of 99 inches and a capacity of 27.46 cubic feet. It features three 27-inch doors and a stainless steel top, front, and ends. The interior ends and door frame are made of ABS plastic. The table is equipped with 6-inch casters and a side-mounted refrigeration system using R290 Hydrocarbon refrigerant. It has a 1/4 hp compressor and is cUL, UL, NSF, and ENERGY STAR® certified.
Standard features include electronic control, a stainless steel top, casters, finished stainless steel ends, and a stainless steel exterior. The unit uses environmentally friendly R290 refrigerant and has a high-density foamed-in-place polyurethane insulation to keep energy costs low. It comes with a three-year parts and labor warranty and an additional two-year compressor parts warranty.
Optional accessories include a lock, legs, tray racks, laminate end and back, refrigerated drawers, additional shelves, cutting board, Celsius readout for electronic control, and an 18-inch deep single tier stainless steel overshelf.
The exterior top is made of heavy-duty stainless steel with a square nosing at the front. The exterior back and bottom are galvanized steel, while the exterior ends are finished with stainless steel. The interior base has a stainless steel back and bottom, and the interior ends and door frames are made of thermo-formed ABS plastic. The base is insulated with high-density foamed-in-place polyurethane. Each interior door section has a removable epoxy-coated wire shelf. The doors have a stainless steel exterior front and a thermo-formed ABS plastic interior liner. The base has a machine compartment on the right side, which houses the condensing unit, condensate evaporator, and electrical junction box. The machine compartment has a removable louver for access to the condensing unit. The blower coils with expansion valves are located behind the door mullions. The refrigeration system uses R290 refrigerant and maintains a temperature of 36°F to 40°F. The electronic temperature controls and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. The base has on/off switches located behind the louvered panel.
