This commercial undercounter dishwasher measures 24"W x 23-1/2"D x 31"H and features a sustainer heater for low temperature chemical sanitizing. It has a capacity of 30 racks per hour and a dish clearance of 12-1/8"H. The dishwasher is equipped with built-in chemical pumps and a deliming system, as well as built-in primer switches and an instant start function. It has upper and lower stainless steel wash arms with reinforced end caps, a pumped drain, and a pump purging system. The dishwasher also has a built-in strainer for the water inlet and a door safety switch. The electrical components are housed in a stainless steel drawer. The dishwasher is made of stainless steel construction and has 4" adjustable legs. It includes one open rack and one peg rack, and has a 1 HP wash pump. It is NSF, UL, and cUL certified. Standard features of the dishwasher include a built-in instant start, a 12-1/8" door opening, built-in primer switches, and two dishracks. It has a capacity of 30 racks or 120 covers per hour. The dishwasher has stainless steel legs that are 4" in height and a door safety switch for safe operation. It can be connected to a standard pump for draining or to an uphill stand pipe for draining. The dishwasher has a stainless steel pump impeller for extended life and service. It is economical to operate, using only 1.7 gallons of water per cycle. The dishwasher also has a built-in strainer in the water inlet system to prevent clogging of the water valve. It is equipped with built-in chemical pumps and a deliming system for proper chemical usage. The dishwasher is made of all stainless steel construction for durability and trouble-free operation. It has a pump purging system to eliminate soil and chemical carryover during the rinse cycle. The dishwasher has a unique spray arm system with upper and lower stainless steel wash arms with reinforced end caps. The electrical components are conveniently housed in a sliding drawer for easy access and service. Available options for the dishwasher include a sanitizer alarm and a sustainer heater. Additional options include a stainless steel pedestal, stainless steel 6" legs (set of 4), alternative electrical for export, and a 48" undercounter dishtable with pre-rinse. The "TEMP-SURE" model requires a separate 208-240v 3 phase 40 amp power
