Beverage Air STF58HC-1-S

Brand
Beverage Air
Refrigeration Type
Forced Air
Made in
USA
Refrigerant Type
R-290
Certifications
cULus
Access Type
Double Sided
Finish
Stainless Steel
Capacity
24.5 cu. ft.
Temperature Range
36 - 38 Degrees F
Voltage
115 Volts
Width (in)
58
Height (in)
47.75
Depth (in)
34
Weight
498.00
Loading Dealers...
The School Milk Cooler is a forced-air cooler with dual access. It has dimensions of 58" W, 34" D, and a capacity of 24.3 cu. ft. The cooler features an exterior digital thermometer and full electronic control. It has flat top carton capacities for (16) 13" x 13" x 11" or (10) 19" x 13" x 11" cases. The cooler has four self-latching doors/lids with safety bumpers and epoxy coated steel wire floor racks. It is made of stainless steel both on the interior and exterior. The cooler uses R290 Hydrocarbon refrigerant and has a 1/3 HP motor. It is UL, cULus, UL EPH Classified, and UL-Sanitation certified. The cooler is made in the USA.

The STF Series dual-access, forced-air milk coolers are designed to hold milk between 36°F to 38°F until ready to serve. They come in two sizes to hold either 12 or 16 milk cases (13" x 13" x 11") per unit. The coolers can also accommodate (19" x 13" x 11") milk cases.

The cabinet construction of the cooler includes stainless steel lids, doors, adjustable hinges, and door latches. The exterior is finished in white on steel, while the interior is made of galvanized steel. The floor is reinforced stainless steel for maximum milk crate support. Epoxy coated steel wire floor racks are provided for added floor protection. The cooler also features a digital exterior thermometer, cylinder lock, bottom drain, latch safety bumpers, and swivel casters (2 with locks).

The cooler is made with all steel construction and 3-screw hinges for durability. The self-latching doors have safety bumpers for added convenience. The centrally located floor drain makes cleaning easy, and the doors have flexible compression gaskets for a tight seal. The cooler is also available with a stainless steel exterior and interior, as well as additional options like wrap around and corner bumpers. The foamed-in-place CFC and HCFC-free polyurethane insulation enhances the structural strength of the cabinet and increases energy efficiency.

The refrigeration system of the cooler uses dual evaporators to evenly distribute airflow and envelop the contents in a blanket of cold air. It uses R134a refrigerant, which is CFC and HCFC-free for environmental safety.

Special
Similar Items